ppr管材管件-黄冈ppr管材-Gafloon卡弗龙

现在，一些小的宾馆或一些建筑物的部分商业、办公区域也需要用到采暖和生活热水，黄冈ppr管材，他们的热负荷或生活热水用量要比家庭大许多（即并联安装若干台燃气壁挂炉）；因此热水管的管径比较大，在与集分水器、隔离罐、控制附件等连接时需要用到法兰连接。
now， some *all hotels or some commercial and office areas of some buildings also need heating and domestic hot water， and their heat load or domestic hot water cost i*uch larger than that of families (that is， several gas-fired wall mounted boilers are installed in parallel); therefore，ppr管件管材， the diameter of the hot water pipe is relatively large， and flange connection is needed when connecting with the water distributor， isolation tank， co*ol accessories， etc.
ppr管格与管件连接端面必须清洁、干燥、无油。
用卡尺和合适的笔在管端测量并标绘出热熔深度，热熔深度应符合下表规定：
熔接弯头或三通时，按设计图纸要求应注意其方向，在管件和管材的直线方向上，用辅助标志标出其位置。
the connecting end face of ppr pipe lattice and pipe fitting*ust be clean， dry and oil-free.
measure and plot the hot melt profundity at the pipe end with a caliper and a suitable pen. the hot melt profundity shall meet the requirements of the following table:
when welding elbows or tees， the direction could be noted according to the requirements of design drawings， and the place shall be marked with auxiliary marks in the straigh*rection of pipe fittings and pipes.
水管卡扣
铺设好的冷热水管一定要用卡扣固定好，避免后期装修过程中水管移位，ppr管材管件，导致接头脱落、松动，产生漏水隐患。尽量做到每隔60cm就要安装一个卡子，ppr管材厂，切记卡子安装一定要牢固。成品保护很重要，铺设的水管，避免有重物压在水管上。
water pipe le
the laid cold and hot water pipe must be fixed with clamps to *oid the displaceme*f the water pipe in the later decoration process， which leads to the joint falling off and loosening， and the potential water leakage will occur. try to install*ip every 60cm， and remember that the clip must be firmly installed. the finished product protection is very important. the water pipe laid should be protected from he*y loads on the water pipe.
ppr管材管件-黄冈ppr管材-gafloon卡弗龙由台州艾菲力塑胶有限公司提供。台州艾菲力塑胶有限公司是一家从事“塑料制品（不含塑料桶）,橡胶制品（不含橡胶桶）,阀门”的公司。自成立以来，我们坚持以“诚信为本，稳健经营”的方针，勇于参与市场的良性竞争，使“艾菲力,卡弗龙”品牌拥有良好口碑。我们坚持“服务至上，用户至上”的原则，使艾菲力塑胶在塑料管中赢得了客户的信任，树立了良好的企业形象。 特别说明：本信息的图片和资料仅供参考，欢迎联系我们索取准确的资料，谢谢！同时本公司还是从事ppr管，地暖管，pvc管的厂家，欢迎来电咨询。