10JNEX900川崎超级铁芯超薄高硅无取向硅钢片

core loss
低铁损 core loss in high-frequency ranges is extremely low.this allows for low heat generation and size reductions formagnetic components such as high-frequency reactors andtransformers.
在高频率领域中铁损非常低。
充分发挥此特点，可实现高频电抗器、高频变压器等机器的低发热和小型化。
low magnetostriction
低磁致伸缩 magnetostriction which causes noise and vibration isnearly zero. this enables significant noise reductions for magneticcomponents such as reactors and transformers.
磁致伸缩引起的噪音、振动几乎为零。
充分发挥此特点,可大幅度降低电抗器、变压器等机器的噪音。
high permeability
高导磁率 the permeability is extremely high across a wide rangeof fre, making it highly suitable for use in shieldapplications and ct.
从低频到高频，导磁率非常高。
充分发挥此特点，可用于屏蔽用途或电流转换器等。
stable
质量稳定 the high-temperature processing provides thermalstability. since there is minimal deterioration of the propertiesdue to machining, so stress-relieving anneals are not re
由于作了高温处理，所以具备热稳定性。
且加工导致的特性劣化程度低，
所以不需要做消除应力退火处理。
non-oriented
无取向性 there is virtually no difference in the characteristicsbetween the rolling direction (ldirection) and the transverse(c-direction). therefore, this can be used in a wide range ofapplications, from stationary machines to rolling machines.
产品的轧制方向(l方向)和宽度方向（c方向)的特性几乎没有差别。
因此，可广泛应用于从静止器到旋转机等各种领域。